©2009 - Mark Kett
When inserting or removing frets, it helps if the fret slots are beveled. The bevel allows the fret to be inserted and removed without disturbing the top level of the fingerboard that the fret rests against.
Bevel one edge of the fret slot at a time. Approach from the center of the fingerboard, and move toward the edge with a pushing motion. This method helps maintain the top of the fingerboard binding. When one side of the fingerboard is done, turn the guitar around and bevel the other side.
The bevel should not extend past the width of the fret. §
When inserting or removing frets, it helps if the fret slots are beveled. The bevel allows the fret to be inserted and removed without disturbing the top level of the fingerboard that the fret rests against.
